Four reasons to confirm why a miter saw is better than a band saw – 2017 version

miter saw with standThe four primary reasons to confirm why a miter saw is better than a band saw in 2017 are its versatility in cutting wood, price range, portability and ease of adjustments. However there is one limitation.

Band saw can be used to cut more types of materials like plastic, metal and others whereas miter saw is mostly used for cutting wood. But the precision of output from the miter saw is far superior compared with the band saw.

Versatility tells you why a miter saw is better than a band saw

  • The best 12 sliding miter saw can be used for making straight line cuts as well as angled cuts at different positions on the material. The precision can be measured up to micro meters while it is not so with a band saw.
  • The types of cut on the miter saw are also more versatile compared to top rated band saws of 2017. You can easily make bevel cut, miter cut, cross cut and rip cut by adjusting the angle of the blade on both directions (left and right). In case of compound sliding miter saw you can move the tool to any position on the work table and perform the cuts. In case of a band saw you have to move the material with respect to the tool which could be more cumbersome and irritating at times especially if the material is long and wide.
  • Bevel adjustments are easier in case of miter saw. Once the base angle is set at zero you could turn it to any angle of precision according to your choice. Here you don’t need to move the material at all. This will automatically ensure near zero kickback on the material. Bevels can range from 0-degree to 49+ degrees with more number of positive stops compared to the conventional band saw.
  • The process of changing blades is easier in case of miter saw compared to saw. You don’t need to dismount the material as the blade guard can be lifted up. This consumes less time and makes it more hassle free.
  • Miter saw is relatively safer to operate than a band saw, especially for novice users.
  • Miter saw has more advanced versions supported by LED lights, which gives precise alignments without having to calibrate the device frequently. Band saw is relatively conventional in this part since you need to recalibrate the tool frequently once you change blade.
  • Miter saw has a higher visibility scale compare to the band saw.

Ease of Portability tells you why a miter saw is better than a band saw

Disassembling a miter saw is faster than a band saw. A typical miter saw weighs an average of 56LBS while an average Band saw weighs 123.45 LBS.

Price Range

An average Miter saw with 6000RPM speed costs about $125 while a band saw of the same capacity costs 4 to 5 times more.

Ease of Adjustments

Sliding and angular movements make miter saw easier and faster to adjust than the band saw which tells you why a miter saw is better than a band saw.

Continue Reading

9 Pieces of advice for the expert carpenter

why you need a miter sawUnderstand the characteristics of the woods you’re using. There are lots of differences in wood types. The trees that these woods come from could take the stain differently. Depending on the cut, you will see varying effects on splintering. And, there are quite a few varieties when it comes to grains. All of this will become factors in your woodworking project.

TIPS! Are you dealing with a screw that’s difficult to get to but needs to be more tight, but you don’t have any room for your screwdriver and hand? Do not look past your toolbox for the answer. Grab a screwdriver with a long handle and a 12-point socket.

Wear ear protection. Working with wood can be very noisy. Continued exposure to the noise can cause some hearing loss. Ear plugs or headphones are very beneficial in the workplace. Make sure you wear them when working with woodworking tools.

TIPS! Don’t lose touch with others. Woodworking shops are generally personal spaces without Internet.

Make sure your workspace is well lit. Accurate measurements are essential in woodworking. Additionally, you are working around dangerous, sharp tools. These activities mean that you must see properly to avoid mistakes and injury.

TIPS! Enjoy the yard you have with your woodworking skills. You can build a bird feeder along with a nice deck to watch the birds from.

There are some essential hand tools that you should get before beginning your initial woodworking project. A hammer is a good first tool. A claw hammer is the best type for woodworking. Get one that feels good when you hold it. A tool that is very heavy won’t work well for your purposes.

TIPS! Use some woodworking kits when you are first starting out. They have all you need to complete a project.

Now that you have read through the above suggestions, put them to use to help you improve your woodworking skills. Continue learning more tips so you can better your skills continually. And don’t become discouraged! Woodworking is a skill that takes dedication and a lot of patience.

Related carpentry articles

Tips for the weekend woodworker

Why a miter saw is better than a band saw

Tips for the intermediate woodworkers

Advice for the expert carpenter

Continue Reading

Woodworking tips for the intermediate carpenter

top rated miter saws 2017Are you aware that your workbench height is essential for having successful woodworking projects? To figure out how high your workbench should be, you should measure how far your waist is in comparison to the floor. This lets you know what the best height is for your workbench.

TIPS! Select the correct wood to complete your project properly. In woodworking, different types of wood handle have different levels of stress tolerance.

Always stir your stains and finishes instead of shaking them. Some of the ingredients tend to settle as time goes on. Shaking can cause bubbling which prevents the products from mixing properly. Stir completely, allowing all settlement to blend evenly and smoothly.

TIPS! One of the more recent developments in stains are gel stains. Gel stains work better on the wood because they don’t run like the liquid stains do.

Select the proper wood for any project you do. Some woods are not as strong as others. Learn as much as you can about the different varieties of wood before beginning any woodworking project.

TIPS! When cutting a narrow wooden piece, do not use fingers like guides! It is a better idea to use a long, narrow piece of wood as a tool to guide it through the blade. This helps you keep every finger, which are required for doing future woodworking.

All woodworking shops need stair gauges. They are generally used for laying out stair jacks, but they can be used to clamp carpenter’s squares. This will transform your carpenter’s square from a straight-line tool, into a straight guide for your saw. When you use the square, every cut will be perfect.

TIPS! It is a good idea to keep a small ruler in your pocket, but you may find it falls out when you bend over because of the length. Get a metal ruler instead, as well as a small telescoping magnet for picking up loose screws.

Know the characteristics of any wood before you buy or use it for a specific project that requires staining. Paint grade always indicates that the wood isn’t a good quality, for instance, and stain grade will mean the grain pattern will be good for staining. Also realize that veneer and particleboard are different. Particleboard will absorb too much stain, veneer might not absorb enough. Using the appropriate wood means your project has a better chance of turning into what you want.

TIPS! Know the different characteristics of the woods that you’re using in your projects Each type of wood is completely different. The trees that these woods come from could take the stain differently.

More carpentry articles

17 Must know tips for the weekend woodworker

Four reasons to confirm why a miter saw is better than a band saw

Woodworking tips for the intermediate carpenter

9 Pieces of advice for the expert carpenter

Continue Reading

17 Must know tips for the weekend woodworker

good miter saws 2017TIPS! Safety always comes first. Always ensure that safety comes first, and you know how to properly use all the tools.

Delving into the woodworking craft can be lots of fun. Whatever you want to produce, wood can help you achieve it. It is not easy, but there are many thing you could learn to help along the way. With a little practice, you can really develop the skills needed to create something you are fond of.

TIPS! You should always test stain on a small area or on a wood scrap. This will give you an idea of what it will look like on the finished project.

Safety is important when working with wood. Be sure to follow all safety directions when using power tools. Don’t take the guards off the tools you have as they were put there for your protection. You can’t complete the project if you end up hurting yourself.

TIPS! Do you realize that your workbench height is key to the success of your projects? To find the ideal height, take a measurement of the distance between your floor and your waist’s midline. This will give you the optimum height for a perfect workbench.

More articles on carpentry, woodworking and miter saws

17 Essential tips for the weekend woodworker

4 reasons to why a miter saw is better than a band saw

Woodworking advice for the more experienced carpenter

9 Things every expert carpenter must know

Continue Reading